An adhesion test checks whether the proposed coating system bonds to the existing roof surface. The test sample needs to represent the preparation, coating and any primer planned for the job. That gives the contractor a basis for choosing the system before coating the full roof.
Older repairs, existing coatings and changes in roof material can create different surfaces on the same building. A restoration proposal needs to account for those differences and explain the next step if the tested system falls short.
Golem Roofing is ASC-certified and works with American Standard Coatings (ASC) silicone coating systems. We follow the manufacturer’s specifications for the selected roof assembly, from surface preparation to the completed coating.

Start with the surface under the coating
A low-slope roof may include an existing membrane or coating, repaired areas, and different materials around details. A proposal that says only “apply silicone” does not identify what the product must adhere to. Ask the contractor to identify the existing surfaces they assessed and any areas that require further investigation.
The roof also has to be suitable for restoration. Cleaning can remove surface contamination, but it cannot make wet or unsound material sound. Repairs or removal of unsuitable materials may be needed before the contractor can prepare the roof for a coating system. For water that remains after rain, the restoration scope should address the underlying conditions as well as the coating selection.

Match the test to the proposed work
Ask which roof areas will be represented by the test locations, especially if the surface changes between the open roof, older repairs, and details. A result from one surface should not be assumed to describe every other material on the building.
The ASC S product sheet requires proper preparation and a surface that is clean, dry and free of loose particles. For the proposed ASC system, settle the preparation, test method and evaluation criteria with the manufacturer before the full roof is coated.
Have the contractor identify the coating, preparation, any primer, and the manufacturer’s evaluation criteria before work proceeds. Cure time can vary with the product and conditions. Ask when a result will be available and how the contractor will document the locations, conditions, and outcome for your property.
Specify the primer for the actual roof
A primer is part of the selected system, not an interchangeable extra. The estimate should name any primer, explain its purpose and identify the ASC specification being followed for your roof surface.
For example, the ASC SP Silicone Primer product sheet calls for a clean, dry surface and gives an application range that depends on the substrate. That does not establish the right primer for every roof. Have the contractor confirm the product and preparation with ASC for your existing surface and proposed silicone assembly.
If the result is insufficient, settle the next step before coating
Ask the contractor what the selected manufacturer’s criteria require and who will review the result. If the tested assembly does not meet those criteria, a responsible next step may be to reassess the surface, preparation, or proposed system and consult the manufacturer’s technical support. Have the contractor follow that guidance for any revised preparation or primer and establish whether the revised system meets the manufacturer’s criteria before coating.
Agree on how a change would affect the scope and price before approving it. Request the documented result and the final product names with the proposal or project records. If testing is excluded from a competing bid, ask how that contractor will establish compatibility and whether a separate assessment is needed.
ASC inspections and warranty eligibility
Our ASC warranty process includes following the manufacturer’s system specifications and completing two to three inspections with the manufacturer. Where the roof and system qualify, Golem Roofing can offer a 20-year ASC manufacturer NDL warranty, subject to ASC’s acceptance and the written warranty issued for the project.

NDL means “no dollar limit” for covered leak repairs under the warranty’s terms. ASC’s sample 20-year warranty requires a complete system installed to its specifications and formal warranty issuance. Review the actual warranty, exclusions and maintenance duties for your property; inspections and coating alone do not create warranty coverage.
To discuss an existing low-slope roof, contact Golem Roofing about silicone roof coatings. Share the roof history, any known existing materials, and prior repair records so the proposed restoration can be assessed against the actual surface.
Related Roofing Services
Move from this article into the right service path without losing the context behind your roofing decision.
Residential roofing
Installation and replacement paths for shingle, tile, concrete tile, and metal roofs.
Repair and maintenance
Inspection, leak repair, maintenance, and repair planning when the roof still has useful life.
Commercial and HOA
Commercial replacement, HOA planning, TPO systems, and silicone roof coating options.
Planning and proof
Start with the right service path, then review certifications, projects, and customer proof.
Service Areas
Golem Roofing serves Long Beach, the South Bay, Palos Verdes, and nearby Los Angeles County communities.
More Roofing Guides
Related articles selected from the same roofing topic cluster.
- Silicone Roof Maintenance: What to Check After Restoration
- Before an HOA Roof Project Starts: Access, Notices, and Daily Handover
- Water Still on Your Flat Roof? What to Resolve Before Coating
- Flat Roof Restoration Done Right: Repairs, Reinforcement & Silicone Coating
- Apartment Building Roof Restoration: From 8 Tons of Gravel to a Complete System
- Long Beach Flat Roof Restoration: A Complete Silicone Roofing System










